GRP grating combines fibreglass rovings with thermosetting resin to form a solid, lots bearing (chosen densities), one-piece moulded panel. They are a prominent choice to galvanised or stainless steel grating because of being relatively light-weight, rust immune, highly durable as well as UV secure.
The composite make-up of our GRP grating consists of a fire resistant additive that attains a Euro Course 1, ISO 11925-2 certification (comparable to ASTM E84 course 1 and BS 476 component 7, class 2). The gritted surface area has been evaluated based on BS 7976-2 and offers a phenomenal level of slip resistance. PAR Team also use an on-site suitable service if needed. GRP grating is readily available to acquire online at PAR Straight by clicking the link over.
Floor covering, systems, pathways, drain covers, production line, trench covers, staircases, ramps, filters as well as safety secure fencing.
Temperature level: -100 ° C to +180 ° C. Slip resistant.
Difficult and long lasting.
Easy to set up.
Rust, fire and UV immune.
Non-conductive, lightweight and upkeep totally free.
- Fibreglass GRP Grating is supplied gritted on one side and un-gritted on the other as requirement.
- We provide a cutting solution; please state the dimensions you need at the point of enquiry.
Keep in mind: Other sizes, densities as well as colours are available upon demand. If a particular colour of product is required, please state this in writing at the point of enquiry. We can additionally offer panels with a laminated GRP strong top upon demand.
Adjustable feet can also be provided to aid with water drainage where grating is set up onto level surface areas. Our part 465489 is suitable for use with GRP grating with a mesh pitch of 38 x 38mm (internal mesh of 32 x 32mm). This increases the grating up, allowing for the drain of liquids.